Brand Name : Filter Bag For Cement Plant
Model Number : Polyester Acrylic PPS P84 PTFE fiberglass dust filter bag
Certification : ISO9001-2015
Place of Origin : Made in China
MOQ : 100pcs
Price : Negotiable
Payment Terms : T/T, Western Union, L/C, 30% in advance,the balance before loading
Supply Ability : 1000 pcs per day
Delivery Time : 3 days
Packaging Details : Carton or Woven Bag
Material : PTFE
Thickness : 1.6-2mm
Application : Building Material Shops, Manufacturing Plant, Printing Shops, Costruction Works
Feature : High Filtration Accuracy Anti-static Anti-acid And Alkal Anti-abrasion
Weight : 500gsm, 550gsm and 700gsm
Usage : Air Filtration,Powder filtration,Metal collection ect.,
Type : Pocket Filter, Aramid Filter
Working Temperature : 120-150 Degree
Air Permeability : 120 L/m2/S
Filtration Efficiency : < 5mg/Nm3
Product Details
Usage: Air Filtration,Powder filtration,Metal collection ect.,
Dust collector type:Pulse jet bag filter
Application:Coal-fired boilers, flue gas purification in waste incinerators, coke ovens, kilns and chemical drying,carbon black powder capture, pneumatic transport, chemistry, cement,power etc.,
Article Name |
aramid needle punched filter felt |
|
Material |
Fiber |
aramid |
Scrim |
aramid/PTFE |
|
Weight |
g/m2 |
550±20 |
Thickness |
mm |
2.0±0.2 |
Air Permeability |
m3/m2. min.200pa |
15-40 |
Breaking strength (N/5cm) |
Warp |
≥800 |
Weft |
≥1000 |
|
Elongation@50N(%) |
Warp |
≤10 |
Weft |
≤45 |
|
Service Temperature (°C) |
Continuous |
≤200 |
Instant |
240 |
|
Finishing |
Singeing, calendaring, PTFE dipping |
|
Application |
Coal fired boiler, biomass energy, waste incineation, etc |
Filter Bag Specification
Type | Flow rate(m3/h) | Filtration Area(m2) | Size (Diameter X Length) | |||||
#1 | 20 | 0.25 | 7" x 16" (180mm x410mm) | |||||
#2 | 40 | 0.50 | 7" x 32" (180mm x 810mm) | |||||
#3 | 6 | 0.10 | 4" x 8.25" (102mm x 210mm) | |||||
#4 | 12 | 0.15 | 4" x 14" (102mm x 356mm) | |||||
#5 | 25 | 0.30 | 6 7/8" x 34" (175mm x 870mm) | |||||
*Size could be on your request. |
Working Conditions
Temp. | Aqueous | Aliphatic | Alkaline | Strong Alkaline | Aromatic | Acid | Strong Acid | |
PET | 130℃ | √ | √ | √ | √ | √ | ||
PPF | 90℃ | √ | √ | √ | √ | √ | ||
PPP | 90℃ | √ | √ | √ | √ | √ | ||
NMO | 130℃ | √ | √ | √ | √ | √ |
ORDER INFORMATION
PRODUCT | MATERIAL | MICRON | Seal Type | SIZE | How to Order ?-Example | |||
FB | PET | 5um=500 | Steel Ring- S | 1 |
Polyester Filter Bag; 5um; Steel Ring; Selection Code is: FBPET500S1 |
|||
PPF | 10um-1000 | Polyester Ring -P | 2 | |||||
PPP | 25um-2500 | 3 | ||||||
NMO | 50um-5000 | 4 | ||||||
75um-7500 | 5 | |||||||
100um-10000 | 6 | |||||||
7 | ||||||||
X-special |
Produce process:
1)Fiber:high grade Aramid fiber
2)Scrim: Aramid/PTFE
3)Produce Process:needle punched
4)Filter Felt Weight: 550±20gsm
5)Filter Felt Thickness: 2.0±0.2mm
6)Finish treatment:Singeing, calendaring, PTFE dipping
7)Laboratory Testing:check the test report below
8)Cut according to customer's requirement
9)Packing according to customer's requirement
Precautions for dust bag installation
1. Old cloth bags of the new process should not be mixed, to avoid different damage time and affect the normal operation of the dust removal equipment.
2. Aging of cloth bags. Mainly due to the following reasons, a cause investigation is needed, corresponding measures are taken and the dust filter bag is replaced.
1).Due to abnormal high temperature and hardening shrinkage; 2). Due to contact with the acid, alkali or organic solvent vapor reaction; 3).React with moisture.
3. The filter cloth should not be hung too tightly or too tightly. It is easy to accumulate dust if it is too loose.
4.Replace the cloth bag, blow it with compressed air first, and then check if there are any holes. After the holes are repaired, leave them for replacement. As dust
Rinse the cloth bag, rinse it with water, and leave it for replacement after drying.
5.Blockage of dust bag. When the bag is clogged, the resistance increases, which can be expressed by the reading of the differential pressure gauge. Cloth Closure
plugs are the main cause of wear, perforation, and shedding of bags. The cause of the clogging of the dust bag is checked and repaired as follows.
1).Temporarily strengthen the dust removal to solve the clogging of the bag; 2).Replace the bag partially or completely; 3).Adjust the installation and operating conditions.
FAQ
Q1. How about your delivery time? |
A1: Generally, it will take 7-30 days after receiving your advance payment. The specific delivery time depends on the items , transportation ways and the quantity of your order.
Q2. Can you produce according to the samples? |
A2: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q3. Is it convenient to install and operate the equipment? |
A3: Convenient, we will take a one-to-one service for customers, for each customer tailored for your product equipment and a complete set of solutions.
Q4. What is your terms of payment? |
A4: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q5. Can it really meet the environmental requirements? |
A5: Ensure that customers meet the environmental standards, the environmental situation of the current 10 mg high emission standards.
Q6. What if the equipment is broken? |
A6: If any problem occurs during the warranty period, we will try our best to solve it and achieve customer satisfaction.After the warranty period of equipment supporting wearing parts to provide 10% discount policy, and to ensure that customers in the use of no worries.
Anti Static PTFE 700gsm 1.6mm Cement Filter Bags Images |